New build - Printable Version

+- (https://6mmarc.com)
+-- Forum: 6MMARC DISCUSSION (https://6mmarc.com/forumdisplay.php?fid=3)
+--- Forum: 6mmARC AR15s and Semi-Autos (https://6mmarc.com/forumdisplay.php?fid=4)
+--- Thread: New build (/showthread.php?tid=1164)



New build - SpeyRod - 03-01-2024

The build parameters for this gun were very specific. To be the most accurate I could build for our biweekly 600 yd shoot. It is not light but it doesn’t need to be. This is expected to be sub moa, hopefully 1/2moa, from 600-1,000 yards.

[Image: IMG_2382_jpeg-3146308.JPG][Image: IMG_2384_jpeg-3146310.JPG]

Specs:

Mega upper and hand guard
Craddock cut 20” Bartlien 5R 1-7.25
CMC bcg with headspaced bolt from Craddock
LaRue lower
MBT trigger
PRS Lite stock
LaRue mount
Viper gen 1 5-25
Q Full Nelson

I can’t shoot it right now but soon…


RE: New build - shooter545 - 03-02-2024

Very nice build! I have never had a barrel from Craddock, especially a Bartlein, that wouldn’t shoot. In for the range report.


RE: New build - SpeyRod - 03-02-2024

Thanks, waiting myself. Dealing with the aftermath of a surgery. As soon as pain levels allow I will go shoot.


RE: New build - SpeyRod - 03-07-2024

Finally got some shooting in. Still learning to shoot with one good arm and 1/2 an arm post surgery.

First groups:
108 eldm factory(I felt pretty loose on this group)
[Image: IMG_2388_jpeg-3151462.JPG]

105 bthp factory
[Image: IMG_2387_jpeg-3151463.JPG]

I noticed a couple groups would stack 3 in one hole so focused on building a solid base for the last group. It paid off as seen above. Can’t wait to see what it’ll do with my handloads.


RE: New build - shooter545 - 03-14-2024

Nicely done Sir, nicely done.


RE: New build - Cwlongshot - 03-19-2024

Looks real good!!


RE: New build - SpeyRod - 03-23-2024

(03-19-2024, 02:43 PM)Cwlongshot Wrote: Looks real good!!

Up to 60 rounds of factory down the tube. Last session saw some promising results with the 108 eldm load. First 3 rounds go into one hole and then I have a flier or two. One of the flier I called but the others were a mystery. Could be me or I am wondering if it could be a magazine issue. I’m using 10 round elanders.

[Image: IMG_2396_jpeg-3163729.JPG][Image: IMG_2395_jpeg-3163730.JPG]


RE: New build - SpeyRod - 03-23-2024

Got out to foul the bore before tomorrow’s shoot. No ccb shift. Also loaded 8 instead of 5 to see if that contributed to the fliers. This is shots 1-5 from ccb with factory 108eldm.

[Image: IMG_2402_jpeg-3167208.JPG]


RE: New build - SpeyRod - 03-24-2024

108 eldm factory. 600 yds fighting suppressor mirage and swirling wind. I’m happy.

[Image: image_cropper_2BF04366-1AAD-4C08-A389-79-3168180.JPG]


RE: New build - SpeyRod - 04-07-2024

Well, 1 hit in 9 shots at 1000. Ran out of elevation so held 16moa. Wind hold 8 moa. Spotting misses impossible due to wet ground. I need a 20 moa mount. The little 6 arc keeps impressing me.

[Image: IMG_2096_jpeg-3181271.JPG]