CZ 527 7.62x39 converting to 6 arc - Printable Version

+- (https://6mmarc.com)
+-- Forum: 6MMARC DISCUSSION (https://6mmarc.com/forumdisplay.php?fid=3)
+--- Forum: 6mmARC Build Help & Troubleshooting (https://6mmarc.com/forumdisplay.php?fid=10)
+--- Thread: CZ 527 7.62x39 converting to 6 arc (/showthread.php?tid=1305)

CZ 527 7.62x39 converting to 6 arc - Bendr - 05-07-2024

Hello! I have the opportunity to pick up a cz 527 in 7.62x39, I'd like to convert it to 6 arc, what would that process look like? I know the bolt face is slightly different and I'd need a new barrel, how would I fix the bolt face issue? I've never converted a rifle to a new caliber before.

Thanks,
Love your forum.

RE: CZ 527 7.62x39 converting to 6 arc - Bassfish1952 - 05-07-2024

(05-07-2024, 08:09 PM)Bendr Wrote: Hello! I have the opportunity to pick up a cz 527 in 7.62x39, I'd like to convert it to 6 arc, what would that process look like? I know the bolt face is slightly different and I'd need a new barrel, how would I fix the bolt face issue? I've never converted a rifle to a new caliber before.

Thanks,
Love your forum.
I converted one there is NO change for bolt face . Put a barrel on it and go .  I did have the new barrel contoured to my stock because I was told I could not find a stock for a carbine . Had Pac-Nor copy the old barrel out to end of stock then take that all the way to the end of barrel .  
I love my cz527 6arc


https://www.loaddevelopment.com/bolt-face-action-database/

RE: CZ 527 7.62x39 converting to 6 arc - Bendr - 05-07-2024

[quote pid='7362' dateline='1715113553']


Thanks for the 



[/quote]
(05-07-2024, 08:25 PM)Bassfish1952 Wrote:
(05-07-2024, 08:09 PM)Bendr Wrote: Hello! I have the opportunity to pick up a cz 527 in 7.62x39, I'd like to convert it to 6 arc, what would that process look like? I know the bolt face is slightly different and I'd need a new barrel, how would I fix the bolt face issue? I've never converted a rifle to a new caliber before.

Thanks,
Love your forum.
I converted one there is NO change for bolt face . Put a barrel on it and go .  I did have the new barrel contoured to my stock because I was told I could not find a stock for a carbine . Had Pac-Nor copy the old barrel out to end of stock then take that all the way to the end of barrel .  
I love my cz527 6arc


https://www.loaddevelopment.com/bolt-face-action-database/


Sorry, still figuring this out,
What barrel did you go with? Thanks!


RE: CZ 527 7.62x39 converting to 6 arc - Bassfish1952 - 05-07-2024

(05-07-2024, 08:44 PM)Bendr Wrote: [quote pid='7362' dateline='1715113553']


Thanks for the 
(05-07-2024, 08:25 PM)Bassfish1952 Wrote:
(05-07-2024, 08:09 PM)Bendr Wrote: Hello! I have the opportunity to pick up a cz 527 in 7.62x39, I'd like to convert it to 6 arc, what would that process look like? I know the bolt face is slightly different and I'd need a new barrel, how would I fix the bolt face issue? I've never converted a rifle to a new caliber before.

Thanks,
Love your forum.
I converted one there is NO change for bolt face . Put a barrel on it and go .  I did have the new barrel contoured to my stock because I was told I could not find a stock for a carbine . Had Pac-Nor copy the old barrel out to end of stock then take that all the way to the end of barrel .  
I love my cz527 6arc


https://www.loaddevelopment.com/bolt-face-action-database/


Sorry, still figuring this out,
What barrel did you go with? Thanks!

[/quote]
I went with a Pac-Nor Barrel 24" match grade and did not have it threaded, But had it done later (mistake on my part) 1-7.5 twist
I hunt deer and target practice always with 90gr or heavier bullets have had no problems with stability

 https://pac-nor.com/

RE: CZ 527 7.62x39 converting to 6 arc - Bendr - 05-07-2024

Thanks!