+- (https://6mmarc.com)
+-- Forum: 6MMARC DISCUSSION (https://6mmarc.com/forumdisplay.php?fid=3)
+--- Forum: 6mmARC Ammunition and Reloading (https://6mmarc.com/forumdisplay.php?fid=6)
+--- Thread: AA2015 powder (/showthread.php?tid=2735)
AA2015 powder - 300BLK - 02-10-2025
Looking at Lyman's 47th, there is pressure data for 6mm PPC with AA2015 powder up through 85gr bullets.
Has anyone tried it, or is there modeling software that includes both 6mm ARC and AA2015
RE: AA2015 powder - grayfox - 02-10-2025
GRT has both the 6Arc and accurate 2015.
Don't recall anyone having shot it however.
I did try some H322 with 75 Vmax's, at least I have a model for it. Must have been "remarkable"... I don't recall the results, maybe it's buried in my notebook somewhere. But when something works well I usually make a mental note of it...
Are you thinking of trying it out?
RE: AA2015 powder - 300BLK - 02-10-2025
I have some AA2015, so might try it. Pressures and velocities seem pretty comparable to AA 2460 and 748 in Lyman's manual, and I have several boxes of 85gr Speer BTs.
edit: Lyman's pressure is in CUP, so 48K CUP roughly translates to 54K PSI, maybe a little over recommended for gas guns
AA2015 and H322 are very close on the burn rate charts, Benchmark 2230 and 2460 are a tick slower