speer 75g hp's and 2000mr - Printable Version

+- (https://6mmarc.com)
+-- Forum: 6MMARC DISCUSSION (https://6mmarc.com/forumdisplay.php?fid=3)
+--- Forum: 6mmARC Ammunition and Reloading (https://6mmarc.com/forumdisplay.php?fid=6)
+--- Thread: speer 75g hp's and 2000mr (/showthread.php?tid=390)

speer 75g hp's and 2000mr - Mel - 07-12-2021

did a quick test of theese today at 31.2-31.4-31.6-31.8g of 2000-mr 

was quite a bit windy today and i think i need to retest but heres the results at 203yards off the bipod 
starting at 3 oclock and moving clockwise 
need to shoot .4 and .6 again on a calmer day was pretty windy and very gusty today 
[Image: gacl8Er.jpg]

RE: speer 75g hp's and 2000mr - Dino11 - 07-12-2021

I don't think those are bad groups shooting on a windy day for that bullet at 200 yards, actually pretty good.

I want to try some of them but I am pretty flush on bullets right now and don't have enough time to test anything right now, Hell I need to get in the reloading room right now and load some. I have a new barrel I want to test out this weekend.

RE: speer 75g hp's and 2000mr - StoneHendge - 07-12-2021

What mags are you using? I couldn't get them to feed in my Duramag's. Bottom of the hollow "point" jams into the lip.

RE: speer 75g hp's and 2000mr - Bologna - 07-12-2021

Nice groups for 200 yards

RE: speer 75g hp's and 2000mr - Mel - 07-12-2021

(07-12-2021, 01:53 PM)StoneHendge Wrote: What mags are you using? I couldn't get them to feed in my Duramag's. Bottom of the hollow "point" jams into the lip.
im using asc arc and grendel 15rd mags
(07-12-2021, 09:34 AM)Dino11 Wrote: I don't think those are bad groups shooting on a windy day for that bullet at 200 yards, actually pretty good.

I want to try some of them but I am pretty flush on bullets right now and don't have enough time to test anything right now, Hell I need to get in the reloading room right now and load some. I have a new barrel I want to test out this weekend.
its not bad at all but i know i/the rifle can do better normally i wouldnt have tested on a day like yesterday but sundays are my only day off so if i can this comming weekend ill probably shoot .4-.6-.8 and add a 32g load to also test

hoping to achieve the same level of accuracy as with the sierra 75g hp;s bottom goup is a 31.4g load 
[Image: RSdHds5.jpg]

RE: speer 75g hp's and 2000mr - BG Shooter - 07-12-2021

Nice. Have you played with seating depth yet. I would shoot the 31.4 and 31.6 loads again with the depth varied. Do 5 at +.015 and 5 at -.015. You got a good load but I think there is a little more there. My experience with 2000 mr is it likes the upper end so you could find the upper node your looking for. I like your results so far. I’ve only used Lever and CFE for the ARC But 2000 gave me good results in my 2 Valkyries. Trashed the brass but makes Bug holes.

RE: speer 75g hp's and 2000mr - Mel - 07-13-2021

(07-12-2021, 09:41 PM)BG Shooter Wrote: Nice. Have you played with seating depth yet. I would shoot the 31.4 and 31.6 loads again with the depth varied. Do 5 at +.015 and 5 at -.015. You got a good load but I think there is a little more there.  My experience with 2000 mr is it likes the upper end so you could find the upper node your looking for. I like your results so far. I’ve only used Lever and CFE for the ARC But 2000 gave me good results in my 2 Valkyries. Trashed the brass but makes Bug holes.
not yet all 20 of those were loaded at the same oal , one thing i just relized was i accidently loaded those in freshly converted 6.5 gren brass so i suspect loading them now into fired brass will make a bit of a difference