+- (https://6mmarc.com)
+-- Forum: 6MMARC DISCUSSION (https://6mmarc.com/forumdisplay.php?fid=3)
+--- Forum: 6mmARC Ammunition and Reloading (https://6mmarc.com/forumdisplay.php?fid=6)
+--- Thread: BLC-2(c) (/showthread.php?tid=473)
BLC-2(c) - riggeek - 10-23-2021
Has anyone tried BLC-2© to powder?
I have an 8 pound jug of this and was thinking of trying under some 87 grain VMAX bullets.
RE: BLC-2(c) - CZ527 Guy - 10-23-2021
Give it a go & highly likely you will be able to work up a load that is very respectable. Play w seating depth & charge weight & ill bet you find a few promising loads within the guidelines of printed load data.
RE: BLC-2(c) - Dino11 - 10-23-2021
I have used it, it works pretty good, your velocity will be down a little compared to Lever and CFE. Accuracy is pretty decent though.
I have about 15 lbs of it, and I think I'm going to use some of it to load .223 plinking rounds over the winter.
RE: BLC-2(c) - r.tenorio671 - 10-24-2021
(10-23-2021, 01:48 PM)riggeek Wrote: Has anyone tried BLC-2© to powder?
I have an 8 pound jug of this and was thinking of trying under some 87 grain VMAX bullets.
...Hodgdon's Reloading Data Center can be your friend ....
https://www.hodgdonreloading.com/reloading-data-center
RE: BLC-2(c) - riggeek - 11-07-2021
Got out to shoot the 87 grain VMAX with 29 grains of BL-C2
Barrel is BSF is 22 inch
RE: BLC-2(c) - Old Marine - 12-22-2021
I shot three 87 Vmax using 29 grains of AA2230, vel. 2950 and the group was .540 out of a bolt gun. If I had BLC-2 I would try it because I have read 2 reports on it (different bullets) and both were good. I place accuracy over velocity unless hunting big game.