+- (https://6mmarc.com)
+-- Forum: INDUSTRY PARTNERS (https://6mmarc.com/forumdisplay.php?fid=13)
+--- Forum: Rexus Outfitters (https://6mmarc.com/forumdisplay.php?fid=14)
+--- Thread: In STOCK Alpha UltraSlim Flash Suppressor Gen 2 (/showthread.php?tid=971)
In STOCK Alpha UltraSlim Flash Suppressor Gen 2 - BluntForceTrauma - 07-13-2023
Our Alpha UltraSlim flash suppressor has a sleek, modern look and is slimmer than a standard mil-spec A2 — but is much more effective while reducing unnecessary bulk.
• Works with 5.56mm up to .30 cal. — and everything in between such as 6mm ARC and 6.5 Grendel — if the barrel is threaded for 5/8-24
• Makes a 14.5" barrel — when pinned and welded per ATF specifications — a non-SBR (Short Barreled Rifle) of over 16" in length
• UltraSlim, low-profile diameter allows a .750" gas block to slide over for installation and removal convenience
• Three-prong design beats all in test after test
• Black nitride finish for all-weather durability
• Fits 5/8-24 muzzle threads
• Length: 2.25"
• Weight: 1.85 oz.
Includes our UltraShim muzzle-device-timing, super-thin washer kit — a $4.95 value!
Get 'em at SixFiveOutfitters.
RE: In STOCK Alpha UltraSlim Flash Suppressor Gen 2 - alwie - 06-21-2024
(07-13-2023, 07:36 PM)BluntForceTrauma Wrote: Our Alpha UltraSlim flash suppressor has a sleek, modern look and is slimmer than a standard mil-spec A2 — but is much more effective while reducing unnecessary bulk.
• Works with 5.56mm up to .30 cal. — and everything in between such as 6mm ARC and 6.5 Grendel — if the barrel is threaded for 5/8-24
• Makes a 14.5" barrel — when pinned and welded per ATF specifications — a non-SBR (Short Barreled Rifle) of over 16" in length
• UltraSlim, low-profile diameter allows a .750" gas block to slide over for installation and removal convenience
• Three-prong design beats all in test after test
• Black nitride finish for all-weather durability
• Fits 5/8-24 muzzle threads
• Length: 2.25"
• Weight: 1.85 oz.
Includes our UltraShim muzzle-device-timing, super-thin washer kit — a $4.95 value!
Get 'em at SixFiveOutfitters.
Does the thread in the flash hider go to the very base of the device like the original? It creates a gap between the barrel and the flash hider for me.