04-01-2021, 02:08 AM
(03-29-2021, 12:42 AM)CZ527 Guy Wrote:CZ, I saw in an earlier post that you had some HDY 100 gr BTSPs in your supply, but haven’t seen that you’ve posted any results with those. I happened across a box of those at my local SW today. Would be happy to hear about your experience with them if you get there before I do.(03-28-2021, 02:18 PM)Dino11 Wrote: 25.5gr. of CFE223 and the OAL was 2.240.
I only shot the last three sets in the kit, the first two are to be used if you have a barrel that is in bad condition in conjunction with the last 3 sets.
I put over a 100 rounds down it yesterday and I have next to no copper building in the barrel, it is nice and smooth all the way from the throat to the muzzle. The other bullets were loaded with Lever. I was hitting 600 yard steel with 100 gr. SPBT Speer pulled bullets I got from American Reloading.
I got around to sorting through the 500 plus 100 gr. SPBT Speer pulled bullets While HBN coating these bullets. Id say roughly 40% of these pulled bullets were not fit for much more than fire forming projectiles. The poor form of the lead tip accounted for the greatest portion of the flaws.
I have been waiting on shipping dies from PV until bullets showed up. must say I am starting to get a bit impatient waiting on the bullets to be fulfilled to ship the dies. Need to make some calls this coming week to explore my options for the back ordered items.
Give a man a deer, and you’ll feed his family for a week or so. Teach him to shoot a deer, and he’ll soon spend all the grocery money on guns and ammo while his family goes without.