10-21-2020, 01:25 PM
I ordered a set of L.E. Wilson 6mm ARC bushing sizing & seating dies from Brownells. They didn't have the bushings I needed so I ordered .265" & .266" bushings from the L. E Wilson website. Depending on brand of brass, those two sizes should be sufficient. It's kinda weird Brownells has these dies but they're nowhere to be found on the Wilson site. You'll need an arbor press for the seating die.
I was already using the Wilson dies for sizing my 6.5 Grendel brass. I prefer them for match type loads but still use Hornady dies for range fodder.
I was already using the Wilson dies for sizing my 6.5 Grendel brass. I prefer them for match type loads but still use Hornady dies for range fodder.
The trick is growing up without growing old. -- Casey Stengal