+- (https://6mmarc.com)
+-- Forum: 6MMARC DISCUSSION (https://6mmarc.com/forumdisplay.php?fid=3)
+--- Forum: 6mmARC Ammunition and Reloading (https://6mmarc.com/forumdisplay.php?fid=6)
+--- Thread: 62 grain Barnes Varmint grenade loads? (/showthread.php?tid=914)
62 grain Barnes Varmint grenade loads? - 6mmNewB - 04-27-2023
Anyone tested these in 6arc yet
RE: 62 grain Barnes Varmint grenade loads? - grayfox - 04-28-2023
If you've got these, I'd imagine the 65 gr Hornady data would do for starters.
JRB had a Bunch of light pills he was doing on one of his vids... I got bored with it personally. He did have some fail to eject/load issues on the lightest bullets. Could be he just didn't want to open up his agb or something. That particular one didn't impress on groups. Not much of a data point but you might check that vid out to see what you think.
RE: 62 grain Barnes Varmint grenade loads? - alwie - 05-11-2023
Your results will vary as I am a novice at reloading, do not know what I am doing, anneal each time I reload and have an adjustable gas block. I have been using this *max load* recipe:
Caliber brass Barrel Primer Bullet Bullet-Weight Powder Grains Trim-Target Headspace-Target Bullet-Seating-Length
6mm-ARC Starline-6.5 McGowen CCI#41 Varmint_Grenade 62 H4895 30.0 1.480 1.180 1.618
RE: 62 grain Barnes Varmint grenade loads? - 6mmNewB - 05-12-2023
(05-11-2023, 06:22 PM)alwie Wrote: Your results will vary as I am a novice at reloading, do not know what I am doing, anneal each time I reload and have an adjustable gas block. I have been using this *max load* recipe:Thank you for sharing. I ran H322 and will ladder test them in my bolt gun. I'll share my results
Caliber brass Barrel Primer Bullet Bullet-Weight Powder Grains Trim-Target Headspace-Target Bullet-Seating-Length
6mm-ARC Starline-6.5 McGowen CCI#41 Varmint_Grenade 62 H4895 30.0 1.480 1.180 1.618