02-25-2025, 08:13 AM
Hello everyone I just built a gas gun with a 20” tactical kinetics barrel and an adjustable gas block. It also had a mill spec 3oz buffer and spring. During the initial test shots the gun cycled just fine with the gas almost all the way down. The brass was ejecting about 4 to 5 o’clock but more word 5. On the last round the bolt did not lock back. After adjusting the gas block basically almost all the way open I finally got it to lock back but only on a Duramag it would not lock on an ASC mag. Any ideas of what I can try? I thought it was under gases but the ejection pattern never changed the whole time I was adjusting the gas block.