03-07-2021, 07:43 AM
Just for fun couple of ideas...
1. In that cycle of load a round with the bcg slamming, don’t shoot but measure it before and after chambering to see if the bullet is pushed back in or scored with lands (ie, sticking in chamber).
2. Do you have a second type of round to try? The 105’s when first released by hornady had a tendency to stick in the chambers b/c hornady sez they loaded them too long, at 2.24 or so... nowadays they load them to 2.200, opinion of some of us on here is that some chambers are actually too short, but no one wants to admit that.
May or may not be linked to your issue but could be part of it somehow.
1. In that cycle of load a round with the bcg slamming, don’t shoot but measure it before and after chambering to see if the bullet is pushed back in or scored with lands (ie, sticking in chamber).
2. Do you have a second type of round to try? The 105’s when first released by hornady had a tendency to stick in the chambers b/c hornady sez they loaded them too long, at 2.24 or so... nowadays they load them to 2.200, opinion of some of us on here is that some chambers are actually too short, but no one wants to admit that.
May or may not be linked to your issue but could be part of it somehow.