03-28-2021, 06:29 PM
My first hand loads were Hornady 6.5 Grendle brass sized to 6 arc, CCI 400 primer, Nosler 105 RDF, and Lever started at 27.5 grains seated to 2.280.
The 27.5 load worked o.k. but primer cratering occurred.
at 27.8 accuracy was good (.610 for three shots) but the third shot popped a primer.
I have a good supply of CCI 400's, but only a few of other makers as the reason I started with them.
I would like to hear from others that have used the CCI 400's in the 6 ARC, perhaps with more success with lighter bullets or other powders.
The 27.5 load worked o.k. but primer cratering occurred.
at 27.8 accuracy was good (.610 for three shots) but the third shot popped a primer.
I have a good supply of CCI 400's, but only a few of other makers as the reason I started with them.
I would like to hear from others that have used the CCI 400's in the 6 ARC, perhaps with more success with lighter bullets or other powders.