(07-07-2021, 08:36 PM)Lemonaid Wrote: Old Bob that was great post! That may be the answer to many unexplained case crushing incidents.
Another potential problem from brass with too thick neck walls would be chambering loaded ammo. How tight of a fit will those loads be in your rifle's chamber? The necks of the resized Lapua brass might benefit from a little neck turning for both seating bullets & functioning in your rifle.
I didn't neck turn my resized Lapua brass because I didn't need to using the Wilson seater. I haven't yet been able to shoot the 6mm ARC loads I made from that brass so I don't know if they're gonna be a tight fit in either of my 6 ARC rifles. I'll eventually get around to it & let y'all know how it worked out.
The trick is growing up without growing old. -- Casey Stengal