Thoughts on freebore
#4
(07-25-2021, 05:40 AM)grayfox Wrote: I have 3 barrels.  These are my measurements to the lands with my hornady comparator.  The Faxon has the most room, and the Monster and Uintah that I have are close equals, not far behind.  Your seating of the 103 Eldx is lots shorter than I need to go as you can see.  I do not have any 105 Bergers or 107 smk(well I have the smk but haven't seated them yet).

Hope the formatting comes out ok on this...

…   ,,,,,,,,,,Faxon-20 Uintah-22,,,, Monster-20
90 TGK: ,,,,,,2.338 ,,,,2.300 ,,,,,,,,….
95 Sst: ,,,,,,,2.203 ,,,,,2.202 ,,,,,2.202
103 Eldx: ,,,,,2.301 ,,,,2.313 ,,,,,2.320
105 Bthp
(Hdy Black):  ,2.277 ,,,,2.277 ,,,,2.274
Nos 95BT: ,,,,,2.222 ,,,,,2.210 ,,,,2.211
90 Eldx   ,,,,,,,,,,,,,,,,,,,,,,2.220 ,,,,,…
100 SGK: ,,,,,,2.140 ,,,,,,2.150 …
100 Hdy-sp  …  ,,,,,,,,,,,,,2.180 …
95 SMK …         ,,,,,,,,,,,,2.318 …
88 Berger …         ,,,,,,,,,2.333 …
95 Berger-
classic … ,,,,,,,,,,,,,,,,,,,,,,,2.186 …

edit to add:  similar to Dino I'm trying to seat most of them about 50-60 thou off the lands.


Looks like you're getting roughly 40 to 50 thou more length out of the 103 ELD-X's, if you're seeing most of your success 50-60 thou off then I'm really going to have a lot of bullet stuffed in the case. I've just started load development with LeverEvolution looking for charge weights that performed consistent in the 2,650 - 2,700 range. Now going to do seating test next starting at .020 off to .050 off in .003 increments. I'll see how they perform before I make any drastic decisions. Thanks for the feedback.
Reply


Messages In This Thread
Thoughts on freebore - by BassinDmax - 07-25-2021, 03:40 AM
RE: Thoughts on freebore - by grayfox - 07-25-2021, 05:40 AM
RE: Thoughts on freebore - by BassinDmax - 07-25-2021, 01:56 PM
RE: Thoughts on freebore - by Dino11 - 07-25-2021, 11:53 AM
RE: Thoughts on freebore - by BassinDmax - 07-25-2021, 02:07 PM
RE: Thoughts on freebore - by Dino11 - 07-25-2021, 03:35 PM
RE: Thoughts on freebore - by BassinDmax - 07-25-2021, 09:19 PM
RE: Thoughts on freebore - by grayfox - 07-25-2021, 08:03 PM
RE: Thoughts on freebore - by Dino11 - 07-25-2021, 09:31 PM
RE: Thoughts on freebore - by grayfox - 07-25-2021, 10:10 PM

Forum Jump:


Users browsing this thread: 6 Guest(s)