07-31-2021, 10:18 AM
Recently received an inexpensive bore scope, So for the 1st time in my life I have an ability to really start to evaluate the bore & how clean it is. Well the bore on this Savage axis is the 1st Ill be using the bore scope on. Far from an expert with this borescope, though the copper build up in the last 4" of the bore on 2 of the land groove locations was imposable to overlook.
This is on barrel I thought I had cleaned very well. Seems I was wrong. After 3 hundred plus strokes w a brush and Flitz bore cleaner the copper in that last 4" is finally cleaned up.
Not sure where I go from here as it seems that last 4" will be very prone to fouling for a long time to come.
This is on barrel I thought I had cleaned very well. Seems I was wrong. After 3 hundred plus strokes w a brush and Flitz bore cleaner the copper in that last 4" is finally cleaned up.
Not sure where I go from here as it seems that last 4" will be very prone to fouling for a long time to come.