In my bolt gun that 2.295 equates to .060 jump, and I use metal GI style mags. You will not get a bullet loaded to that length in a plastic mag. ASC, Duramag, E-Lander, ect...
Make sure to check your chamber with the bullet you are using, these long slender bullets will give you a lot more jump loaded using COAL, I always use CBTO when measuring bullets. I used COAL in the post because that is what most folks understand, your measurement might be different depending on your chamber. Even though this is a SAAMi spec'd round I have seen major differences in chamber depth and freebore from different barrels. I like tight chambers in this round and two of my rifles that have match grade barrels have tight chambers.
Make sure to check your chamber with the bullet you are using, these long slender bullets will give you a lot more jump loaded using COAL, I always use CBTO when measuring bullets. I used COAL in the post because that is what most folks understand, your measurement might be different depending on your chamber. Even though this is a SAAMi spec'd round I have seen major differences in chamber depth and freebore from different barrels. I like tight chambers in this round and two of my rifles that have match grade barrels have tight chambers.
If you can not see the tyranny of having a gun ban enforced by men with guns... Then you fail to understand why the second amendment was written in the first place.