Over-gassing/Timing Issues
#2
I don't think your issue is timing., Especially with an 18er with RLGS+1.  There's no way the case is going to move when it's under pressure - it's gripping the chamber walls a lot harder than the bolt can pull it.

Timing is usually manifested with extractor marks on the case head - the bolt tries to rotate while the brass is still under pressure and the metal in the case head gives since the case under pressure won't budge. Back when I played around with 22 Nosler, timing was so bad the rims on the stupid rebated case heads would literally bend from getting yanked so hard.

Your likely near your limit. I use 26.8 grains of Varget in converted Starline 6.5G with GM205Ms with a 105 RDF at 2450 out of my 16" and I know I'm just shy of max. I have an MLGS and get an occasional case head smear, but timing issues are more manageable than I thought they'd be.

With a AGB, I would try and go as light as possible with the buffer - you can always dial the gas down to compensate. The result is slightly less pulse/felt recoil but the biggest benefit I find is the reduced slam on return to battery, which throws your sight picture off as much as recoil, if not more.
#FJB
Reply


Messages In This Thread
Over-gassing/Timing Issues - by notagrendel - 09-27-2021, 12:14 AM
RE: Over-gassing/Timing Issues - by StoneHendge - 09-27-2021, 11:18 PM
RE: Over-gassing/Timing Issues - by notagrendel - 09-29-2021, 02:57 AM
RE: Over-gassing/Timing Issues - by StoneHendge - 09-29-2021, 10:18 PM
RE: Over-gassing/Timing Issues - by r.tenorio671 - 09-28-2021, 09:00 AM
RE: Over-gassing/Timing Issues - by popgun - 09-28-2021, 02:58 PM
RE: Over-gassing/Timing Issues - by popgun - 09-28-2021, 03:29 PM
RE: Over-gassing/Timing Issues - by notagrendel - 09-29-2021, 02:46 AM
RE: Over-gassing/Timing Issues - by Lemonaid - 09-28-2021, 07:45 PM
RE: Over-gassing/Timing Issues - by popgun - 09-28-2021, 11:01 PM
RE: Over-gassing/Timing Issues - by r.tenorio671 - 09-29-2021, 05:11 AM

Forum Jump:


Users browsing this thread: 3 Guest(s)