01-28-2022, 07:05 PM
There is a thread on here with 95 gr (SST I think) by trashy and me, both of us had results faster than the Hdy data.
My recent shoot with 108 factory Eldm's, 22" uintah bolt action upper, was 2675 SD 12.4.
Midway and a few others are getting lever in every few days or so, bolo for it...
Update, to be fair I don't have any loose 108 bullets, just the 105's and 103's. But both of those I can get into low 2700's with lever. I've gone up to 2763 with the 103 and Lever but that's starting to get hard on the brass, so I backed the 103 down to 2721, lever 29.3 gr (obviously my barrel, current load batch of powder).
In my 20" gas gun barrel, 2690 for the 103 and lever. After looking more closely at my notes, those are the ones I have data for. So one could extrapolate that down to ~factory for the 108 MV. But the 103 factory runs ~2635-2650- in those barrels as I recall.
My recent shoot with 108 factory Eldm's, 22" uintah bolt action upper, was 2675 SD 12.4.
Midway and a few others are getting lever in every few days or so, bolo for it...
Update, to be fair I don't have any loose 108 bullets, just the 105's and 103's. But both of those I can get into low 2700's with lever. I've gone up to 2763 with the 103 and Lever but that's starting to get hard on the brass, so I backed the 103 down to 2721, lever 29.3 gr (obviously my barrel, current load batch of powder).
In my 20" gas gun barrel, 2690 for the 103 and lever. After looking more closely at my notes, those are the ones I have data for. So one could extrapolate that down to ~factory for the 108 MV. But the 103 factory runs ~2635-2650- in those barrels as I recall.