05-28-2022, 01:50 AM
...about to restart my load development now that (1) I have sufficient LVR (2) my barrel has ~150+ rounds thru it. I also picked up a 500qty box of 107 SMK's. I pressure tested them up to 29.1 gns and all looked good. I also received my MagnetoSpeed V3 which should allow better/easier capture of data from my old CHRONY Beta that I clipped on my last outing to pressure test the SMK's. One thing I'm going to change is to load to COAL's recommended by the Berger, Hornady & Hodgdon data for the specific bullets I have. Most of the heavies call for the 2.260" COAL, but lighter projectile's vary.
....I'll post my results if anything worthy shows up, good or bad. To be honest, so far my results have been pretty much similar to what others have posted. Due my location, my temps average 85F/60-85%RH year round so it may be helpful for folks developing their summer loads.....maybe.
....I'll post my results if anything worthy shows up, good or bad. To be honest, so far my results have been pretty much similar to what others have posted. Due my location, my temps average 85F/60-85%RH year round so it may be helpful for folks developing their summer loads.....maybe.