What I physically have loaded is based from published Hornady data for gas gun, and my 20", 1-7 barrel, and my particular chamber dimensions so it's nothing out of the ordinary.
as an experiment I input near low starting point of 25gr, all three appear very similar in case fill, velocity, pressure curve, peak pressure and even down low they all have over 85% burn and case fill.
It seems to follow the same loose trend as charges are increased, but with enough difference to make it worthwhile to find out which one would be best for a particular setup.
I don't think I made any referece to Lyman data, that was trianglevelvet.
If you are familiar with Discord, join the RLD Discord,
https://discord.gg/reloading
There are plenty of guys and gals who are happy share advice and load data in real time.
as an experiment I input near low starting point of 25gr, all three appear very similar in case fill, velocity, pressure curve, peak pressure and even down low they all have over 85% burn and case fill.
It seems to follow the same loose trend as charges are increased, but with enough difference to make it worthwhile to find out which one would be best for a particular setup.
I don't think I made any referece to Lyman data, that was trianglevelvet.
If you are familiar with Discord, join the RLD Discord,
https://discord.gg/reloading
There are plenty of guys and gals who are happy share advice and load data in real time.
SI VIS PACEM, PARA BELLUM