There are a couple on here who have gone out to 1000, I have not. I've gone 300 yds.
But the 105 factory... maybe. At least it gives you some brass.
the 108 factory ought to be in there also.
Some of it depends on what you can find.
Some barrels will need some break in, maybe 50-100 rounds and then they tend to speed up about 50 fps or so.
For the heavies, look at Hornady's data for gas guns, it's a pdf on here as well as on line.
Lever will give you about ~100 fps more MV per grain than CFE, but both seem to be good, also the 2520.
Now all 3 are ball powders so they will have some temp issues as it gets really hot/cold from your loading temp.
Berger has some 105's and 109's available, hornady has their stuff as well, 105/108. Or the sierra 107 SMK hpbt... kind of depends on what your barrel will like.
The hornady 105 loads shorter than saami, usually around 2.200 or a bit less, check it in your barrel before you load a bunch of them. The vld's, like 108, 109 107's, can load longer, mag length will be your limit for those more than likely.
But the 105 factory... maybe. At least it gives you some brass.
the 108 factory ought to be in there also.
Some of it depends on what you can find.
Some barrels will need some break in, maybe 50-100 rounds and then they tend to speed up about 50 fps or so.
For the heavies, look at Hornady's data for gas guns, it's a pdf on here as well as on line.
Lever will give you about ~100 fps more MV per grain than CFE, but both seem to be good, also the 2520.
Now all 3 are ball powders so they will have some temp issues as it gets really hot/cold from your loading temp.
Berger has some 105's and 109's available, hornady has their stuff as well, 105/108. Or the sierra 107 SMK hpbt... kind of depends on what your barrel will like.
The hornady 105 loads shorter than saami, usually around 2.200 or a bit less, check it in your barrel before you load a bunch of them. The vld's, like 108, 109 107's, can load longer, mag length will be your limit for those more than likely.