07-29-2022, 04:46 PM
So I am looking to work up a load for the 80 gr CZ for hunting with my bolt action rifle. Ill be working up the load on a 80 to 95 degree days. Per Hornady load data Tac is offering top velocity. Benchmark I expect will offer considerably better temp stability.
Hunting environment may likely range roughly 50 degrees cooler give or take 30 degrees as we have been known to see some extreme temp differences in mid November.
Per Hornady load manual, Ill be looking to give up roughly 100 FPS with Benchmark under the 80 gr CX.
Considering all copper bulles are really thriving at upper velocities. If the Ramshot Tac loads are printing easily less than MOA, at upper velocity, would I likely be wasting resources to do a load work up with Benchmark as well?
Hunting environment may likely range roughly 50 degrees cooler give or take 30 degrees as we have been known to see some extreme temp differences in mid November.
Per Hornady load manual, Ill be looking to give up roughly 100 FPS with Benchmark under the 80 gr CX.
Considering all copper bulles are really thriving at upper velocities. If the Ramshot Tac loads are printing easily less than MOA, at upper velocity, would I likely be wasting resources to do a load work up with Benchmark as well?