6mm ARC specific reloading equipment
#7
(08-25-2022, 09:34 PM)CZ527 Guy Wrote: Press= universal

dies = cartridge specific

shell holder = cartridge specific

case trimmer = you can go universal OR cartridge specific. my newer favorite is cartridge specific https://www.midwayusa.com/product/101285..._rd_page=2

powder thrower = universal

scale = universal

caliper = universal

priming tool = small & large rifle though generally universal  need another shell holder

Inside outside chamfer tool = universal

Bullet puller for when things don't go as planed Inexpensive inertia puller universal though not recommended.
Collet system Hornady does a nice offering. Collets are caliber specific.

What would be best depends on your goals

Specifically for 6mm ARC you may need nothing more than dies & shell holder. I am expecting the Hornady dies may do well for your intended volume. Though there are nicer dies out there to be sure for considerably more coin.

May be more than you would wish to spend though on the high end Id recommend the Mighty Armory GOLD MATCH 6mm ARC Sizing Decapping Die  https://www.mightyarmory.com/products/mi...apping-die

Whidden seater die
https://www.midwayusa.com/product/1012683313?pid=549242

If you already had everything you may have the #12 shell holder.
though you would do well to check.

top of the line shell holder choice IMHO would be the Redding Competition Shellholder Set #12

https://www.midwayusa.com/product/1012496245?pid=422114
Redding Competition Shellholder Set #12

If you really had everything you would not need this collet puller though Ill throw it out there for consideration.

https://www.midwayusa.com/product/1012764862?pid=851547


https://www.midwayusa.com/s?searchTerm=H...let+puller
Question 
Whidden seater die and the Mighty Armory Sizing Die preform 2 different functions ? and I have read about just resizing the neck especially if firing thru the same rifle. Do I need a full size and a neck sizer ? 

My 90gr. Hornady GMX bullets are in shipment should be here Tuesday , same for the 6.5 Grendel brass , powder and Primer are being picked up at a gun show today.

I just need the Dies, so once I hear from you guys , not a lot of difference in price since I only have to buy 6ARC specific so I want to go with better or best. 

So would it be Seater, sizing and a neck die or ?



Thanks
Reply


Messages In This Thread
RE: 6mm ARC specific reloading equipment - by Bassfish1952 - 08-28-2022, 01:51 PM

Forum Jump:


Users browsing this thread: 7 Guest(s)