09-18-2022, 09:42 PM
If you look at cross section cut brass of Starkine, Lapua, and Hornady... You will see that Lapua brass is the thinnest of those examples in the area you are having problems with. Hornady has the thickest area above the case head by a considerable amount. For the 6 ARC and Grendel Lapua would be my last choice for brass. I couldn't find it but their is a thread showing the cross cut brass on this site some place.
Another thing you might check... When was the last time you checked your scale with certified check weights? Many a reloading problem has been traced to a scale that is not weighing charges properly.
This is a set of weights that only lacks the certification paper work but is a very good set for the money. I have this set and check my scale every time I fire up my Frankford Arsenal powder measure, which by the way is spot on every time. I check the actual weight that I am loading not just the zero setting.
https://www.amazon.com/Troemner-1512-111...132&sr=8-3
Another thing you might check... When was the last time you checked your scale with certified check weights? Many a reloading problem has been traced to a scale that is not weighing charges properly.
This is a set of weights that only lacks the certification paper work but is a very good set for the money. I have this set and check my scale every time I fire up my Frankford Arsenal powder measure, which by the way is spot on every time. I check the actual weight that I am loading not just the zero setting.
https://www.amazon.com/Troemner-1512-111...132&sr=8-3
If you can not see the tyranny of having a gun ban enforced by men with guns... Then you fail to understand why the second amendment was written in the first place.