11-26-2022, 12:26 AM
(This post was last modified: 11-26-2022, 12:30 AM by Burt Gummer.)
Okay folks. I will assume at this point I’m not going to get any recommendations on charge weights. Most likely because I couldn’t wait any longer and couldn’t stop my press from turning out 60 rounds. I couldn’t resist going to the range tomorrow with 57 degree temperatures. That’s a good day right now in MO.
I put together two separate batches with the following recipes:
1. Hornday Fired and F/l sized brass, various 26.6-28.2gr powder weights, BR-4 primer, and Barnes 112 gr Matchburner.
2. Starline 6.5 Grendel re-sized with F/L die to 6ARC previously fired, various 26.6-28.2gr powder weights, Winchester #41 primers, and Barnes 112 gr Matchburners.
Just going to see where the pressure signed start showing and get velocity data tomorrow. I will be calculating off of three shots for each different powder weight. I’ll report back soon.
I put together two separate batches with the following recipes:
1. Hornday Fired and F/l sized brass, various 26.6-28.2gr powder weights, BR-4 primer, and Barnes 112 gr Matchburner.
2. Starline 6.5 Grendel re-sized with F/L die to 6ARC previously fired, various 26.6-28.2gr powder weights, Winchester #41 primers, and Barnes 112 gr Matchburners.
Just going to see where the pressure signed start showing and get velocity data tomorrow. I will be calculating off of three shots for each different powder weight. I’ll report back soon.