04-05-2023, 06:40 PM
Question for those of you who have made 6 ARC brass from 6.5 Grendel brass using a Mighty Armory die:
My early Hornady 6 ARC die would crush untrimmed 6.5G cases because the mouth of the brass would hit the top of the inside of the die. A few others also had the same problem, and trimming before sizing solves it. I was just wondering if anyone who has formed ARC brass from Grendel using a Mighty Armory sizing die has run into this problem. I would prefer to trim after sizing. I will be using Starline brass FWIW.
My early Hornady 6 ARC die would crush untrimmed 6.5G cases because the mouth of the brass would hit the top of the inside of the die. A few others also had the same problem, and trimming before sizing solves it. I was just wondering if anyone who has formed ARC brass from Grendel using a Mighty Armory sizing die has run into this problem. I would prefer to trim after sizing. I will be using Starline brass FWIW.
#FJB