in the 6mm arc I am of the opinion that with all copper, 90 grains is the point of diminishing returns in the 6mm ARC, Anything more & velocity loss due to lack of case capacity may be starting to be, detrimental. Perhaps I am wrong on this, though this is where my gut, & my 45 years of reloading is pulling me. Not quite enough steam in the boiler room for this one.
Are the 95 grain plus offerings worth a try? By all means give it a try & report back. Though the 101 gr hammers recommend a 7 twist. The 7.5 twist of our 6mm ARC will fall a bit short if you have a standard twist.
I had picked up some 70 hammer hunters & 83 grain shock hammers in the past. Expect I'll roll with one of these this season.
Are the 95 grain plus offerings worth a try? By all means give it a try & report back. Though the 101 gr hammers recommend a 7 twist. The 7.5 twist of our 6mm ARC will fall a bit short if you have a standard twist.
I had picked up some 70 hammer hunters & 83 grain shock hammers in the past. Expect I'll roll with one of these this season.