12-17-2023, 02:29 PM
In the final analysis, then, the real question is not, over-pressure or normal, but is it over-pressure for your barrel, or not... some loads, some rounds, for some guns, are fine, < pressure limits, but in other barrels, are not. It's good to ask yourself (and others) if this one is "ok", but it probably would take a few more shots, a bit more info, to reach a definitive conclusion. Like getting some chrony info for comparisons. Or (a bit more subjective) the "feel" of this round as compared to a comparable 120 gr round at the shot -- too sharp? too much recoil, or just about the same as...? that sort of thing.
Loading the CX's and ttsx's for Creed is pretty easy to do, and you can get some good MV, but it will take some barrel length since as a mono they need more velocity to open up properly... as well as retaining some velocit/KE at distance since they typically are less mass per bullet length and lower BC than cup/core's.
Loading the CX's and ttsx's for Creed is pretty easy to do, and you can get some good MV, but it will take some barrel length since as a mono they need more velocity to open up properly... as well as retaining some velocit/KE at distance since they typically are less mass per bullet length and lower BC than cup/core's.