Hunting Zero ?

[Bassfish1952]

I haven't done enough with the 6arc to really have any meaningful real world experience, but I would suggest that you look at the Hornady ballistic calculator and start fudging your zero around a bit.  Be sure to measure and set correctly the sight height.  You may want to try to find a zero distance number that gets you approx +/- 3" MPBR from 0- 300.  Then again you may want to try to stay flatter in the 100-200 range and hold up at 300.

The gas gun 556/223 does well with a 36yd zero.  Some info on that out there on the web

Also I don't know that bullet placement is really any more or less important based on a shift down in caliber.  I'll probably stick with my 260 bolt gun for deer, but if I do run either my 6arc or 223 AR's I'd want to be pitching Nosler Accubond bullets.

Article:  https://chuckhawks.com/sight_rifle_mpbr.html

I've been looking at      https://shooterscalculator.com/. was thinking a 3" circle and hold up on the long shoots , Just was interested in what others are doing

Thanks