Accurate 2520 and Leverevolution

[Bassfish1952]

I was finally able to load some Hornady 105gr with the LVR  also using Hornady Bolt load data. At 29.2gr I started seeing extractor marks on my brass and by 30.0 it was very heavy and didn't shoot the 30.3gr loads.

These were loaded at "Touch" so I don't know if that had a roll in the pressure signs.

I think I am going to try this. I have watched a LOT of YouTube video and his seem to me to make the best sense .




https://www.youtube.com/watch?v=a7vjgEgnhHk