Accurate 2520 and Leverevolution

[KMW1954]

I was finally able to load some Hornady 105gr with the LVR  also using Hornady Bolt load data. At 29.2gr I started seeing extractor marks on my brass and by 30.0 it was very heavy and didn't shoot the 30.3gr loads.

These were loaded at "Touch" so I don't know if that had a roll in the pressure signs.

I do believe that if you were to back off the lands at least .020", your pressure signs would disappear.

 
Already have 15 loaded up at .015" off. now just need to get back out and test.