10-18-2020, 11:50 PM
I tried 2 ladders yesterday, one for the 95 Nosler BT/AA2520;
one for the Sierra 90 Tgk/Varget.
95NBT - my OAL comparator gauge says max OAL is 2.222, I'll use 2.200".
I used the 95 Sst data as my load advice, starting low.
27.5, 2589
28, 2625
28.5, 2662
29.0, 2729
29.5, 2743
90 Tgk, max OAL is 2.338", I'll use more like 2.260 or so, this will be a mag-length limited round but there will be plenty of powder room. I used the 87 Vmax data, starting low.
28.0, 2654
28.5, 2697
29.0, 2761
29.5, 2797
29.8, 2858
Following on these results, I will be loading the 95 Nosler's with Lever, looking for a MV node.
one for the Sierra 90 Tgk/Varget.
95NBT - my OAL comparator gauge says max OAL is 2.222, I'll use 2.200".
I used the 95 Sst data as my load advice, starting low.
27.5, 2589
28, 2625
28.5, 2662
29.0, 2729
29.5, 2743
90 Tgk, max OAL is 2.338", I'll use more like 2.260 or so, this will be a mag-length limited round but there will be plenty of powder room. I used the 87 Vmax data, starting low.
28.0, 2654
28.5, 2697
29.0, 2761
29.5, 2797
29.8, 2858
Following on these results, I will be loading the 95 Nosler's with Lever, looking for a MV node.