New To Reloading Question

[PeteS]

So I pretty sure I figured it out, it was some my fault and mainly the Lee Press I bought. First the press is the Lee Value Turret Press, which I guess it's in the name "Value". The press has a auto index feature which moves the turret with every pull of the handle. I removed the center twisting rod to use it 1 step at a time but with the use of removable turret but of course the detent in the press isn't that strong and the turret can I guess be "slightly" off by the smallest amount and when it comes to measuring in .000 it counts. The turret may of been the culprit with the detent in it which it's only 1 of the 4 holes so I just won't use that hole, don't need it anyway. Switched holes and it's workin way better, I can get it within .001,.002, and .003. 2nd was slighty my fault I guess, where I mounted the press the arm swings under the work bench and you could barely see light through the bottom of the support "beam" of the bench and I relieved the wood so it wouldn't touch but that was just workin the arm without reloading yet and using the pressure it takes to work the brass. It was off by so little, if I worked it real firm it should of been fine so I'm thinking it was more the press. The turret may of been the culprit with the detent in it which it's only 1 of the 4 holes so I just won't use that hole, don't need it anyway. So far so good. Thanks for responses.