I have about 80 5-times fired 6mm ARC Hornady cases

[Ray R]

I have about 80, 5-times fired 6mm ARC Hornady cases.

I do not anneal, so my neck tensioning on these cases is poor.

Let me know if you want them at no charge. 
I just hate the idea of throwing them away.

[Old Bob]

Drill a hole through the some of the cases, leave in the last fired primer & install a factory second blem bullet with a heavy crimp. It's better if the bullet has a cannelure you can crimp deeply into. Use them for either action proving dummies or for checking magazine function.

[StoneHendge]

If you load it and press the bullet tip against your bench and the bullet doesn't move, its absolutely fine for practice work. I wouldn't use it for a match or hunting, though.

Once it is indeed spent, throw it in a bucket in the corner of your garage and take it to the metal scrap yard once its filled. That metal is worth cash.

[Fmuguira]

Ray, I d take the time to anneal them, trim, etc if the primer pockets still hold a primer.

Let me know and I could give you my mailing address.

Were they shot in bolt or gas gun? F/L sized or neck sized?
Thx

[Ray R]

Ray, I d take the time to anneal them, trim, etc if the primer pockets still hold a primer.

Let me know and I could give you my mailing address.

Were they shot in bolt or gas gun? F/L sized or neck sized?
Thx

The pockets have consistently held the primers.
My first reloads were full case sized, after that I neck sized only. 
They were fired in a bolt gun - a Savage Axis II w/22" barrel.
I loaded with 26.8 grains of RL-15 (my most accurate load).
COAL = 2.220" using a Hornady 105 grain HP bullet.
I tried to duplicate the commercial 105 grain Hornady 6mm ARC ammo dimensions.
I used CCI 400 primers.
I didn't measure my velocities, but used "QuickLoad" software to estimate them:
MV ~ 2607 fps, ME ~ 1584 ft.-lb.'s.

I will be happy to send them to you if you feel you can use them.

Ray Roseman

[UncleBob]

Sent you a PM, if there are no dibs, I'll take them.

[Fmuguira]

Ray, you ve got PM from me, thanks much.

[Fmuguira]

Hi Ray, did you see my PM? I sent you address, etc. Thx !

[Fmuguira]

Ray, you decide to keep your old brass? Hadn’t heard from you so thought I d follow up once more.

[Ray R]

Ray, you decide to keep your old brass? Hadn’t heard from you so thought I d follow up once more.

I haven't received your PM and can't find any PM's.
Am I doing something wrong?

[grayfox]

PMs ("Private Messages") are in the header at the top of the web page, on the same line as "Log out -->".

"User CP  ___________   Private Messages (Unread 0, Total 63)  _________  Log Out -->"

Just click on the Words and it will take you there.

[Ray R]

PMs ("Private Messages") are in the header at the top of the web page, on the same line as "Log out -->".

"User CP  ___________   Private Messages (Unread 0, Total 63)  _________  Log Out -->"

Just click on the Words and it will take you there.

Grayfox,

Thank you for the information, it worked. - LOL