08-04-2021, 03:45 AM
I'm putting together an ARC using one of Rebby's 16" Liljas with a Mid length gas system and a non-adjustable Yankee Hill gas block. I don't know the gas port size. What weight buffer should I be using?
|
Buffer weight for 16" middy
|
08-04-2021, 09:19 AM
Your not going to know what it needs until you run it and see what it does. If it were me I would run a standard weight buffer and an adjustable gas block.
An adjustable gas block is pretty much standard for this round but not mandatory. All mine have an adjustable block or gas key, and they all function flawlessly and are soft shooters.
If you can not see the tyranny of having a gun ban enforced by men with guns... Then you fail to understand why the second amendment was written in the first place.
08-04-2021, 05:44 PM
Trust me on this one. You need to run an AGB with an MLGS in 6 ARC. You'll otherwise face broken extractors, ejector marks on your brass and (assuming your going light weight) excess slam on return to battery.
#FJB
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread: 1 Guest(s)