Lapua 90gr Scenar
#1
With loads of rain and time on my hands I took the opportunity to load up some 90gr Lapua Scenar yesterday,  got to the range early and let em rip.    New brass Hornady brass filled up with LVR,  I used Hornadys bolt gun COL for the 90gr GMXs.

Wasnt shooting my best ( hungover) but the Lapua's showed a bit of potential, 50m indoor range.

6mm ARC brass virgin, 1.482, Rem 7.5, LVR, Lapua 90gr Scenar, 2.245

Charge       Velocity

30.8           2935  2904  2927  2916  2934
31.1           2938  2944  2980  2974  2967
31.4           2974   -         -       -        -            lost the data as the magnetospeed logged back to 1
31.7           3020  3015  3003  3030  3045
32.0           3066  3044  3028  3030  3060
32.3           3063  3089  3057  3059  3070

Not a lot of pressure signs showing,  Primer were good not flattened and no ejector marks, no stiff bolt lift.


Attached Files Image(s)
       
Reply
#2
Nice write up, great pics. Thanks! Just to avoid confusion, what barrel length, and action type?
Reply
#3
Hey Lemonaid I conervted my Grendel Howa Mini action, 22 inch barrel
Reply
#4
Found a little more accuracy, still at 50m  Smile


Attached Files Image(s)
   
Reply
#5
Looks like happiness.
Reply
#6
thats 5 bullets lemonaid, Yeap 90grs seem to be a real sweet spot for the 1:8 twist.

Ive been trying 90gr Nosler BT recently and almost every load is 0.6 MOA for 5 shots. Took a nice white Fallow buck recently with the NBT recently too.
Reply
#7
Bill, you will find the coal of 2.245 is good when you reach out to 100 yds and out further. I've been using AR-COMP (2995 FPS and SD of 3.7) groups were less than half inch. Also CFE223 got me higher velocity = 3038 fps and SD of 9.6 with groups of also in the half inch. However, i am using Lapua Brass with BR4 Primers.
Reply
#8
Yeah Ive thought about using BR4 primer, Hornady brass is holding up OK. My SD aint as tight as yours thou, I recently started using a Redding powder thrower but it wasnt with these loads.
Reply
#9
Skyrep, interested in your AR Comp load range for those 90 grainers...
And which rifle/barrel length, AR or bolt...?
I have plenty of ARc and a few different 90's to try, working up and adjusting for OAL and such...

thanks.
Reply
#10
    Grayfox
Rifle:  Savage 10 bolt gun in a GRS Stock.  24" Shaw Barrel 1-7 twist

I've test a few powders (CFE223, 8208XBR, AR-Comp)
CFE223 got me the highest FPS (3038 FPS with SD of 9.6)
8208XBR (2995 FPS with SD of 5.6)
AR-Comp (2925 FPS with SD of 3.7)

All were with Lapua Brass and BR4 Primers.

All loaded to 2.245 COAL.  I did the Satterlee method and have worked out for me very well (less components used).


Attached Files Image(s)
   
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)