Posts: 80
Threads: 15
Joined: Mar 2021
did a quick test of theese today at 31.2-31.4-31.6-31.8g of 2000-mr
was quite a bit windy today and i think i need to retest but heres the results at 203yards off the bipod
starting at 3 oclock and moving clockwise
need to shoot .4 and .6 again on a calmer day was pretty windy and very gusty today
![[Image: gacl8Er.jpg]](https://i.imgur.com/gacl8Er.jpg)
Posts: 365
Threads: 35
Joined: Jul 2020
I don't think those are bad groups shooting on a windy day for that bullet at 200 yards, actually pretty good.
I want to try some of them but I am pretty flush on bullets right now and don't have enough time to test anything right now, Hell I need to get in the reloading room right now and load some. I have a new barrel I want to test out this weekend.
If you can not see the tyranny of having a gun ban enforced by men with guns... Then you fail to understand why the second amendment was written in the first place.
Posts: 399
Threads: 35
Joined: Jun 2020
What mags are you using? I couldn't get them to feed in my Duramag's. Bottom of the hollow "point" jams into the lip.
#FJB
Posts: 12
Threads: 1
Joined: May 2021
Nice groups for 200 yards
Posts: 80
Threads: 15
Joined: Mar 2021
07-12-2021, 05:48 PM
(This post was last modified: 07-12-2021, 09:28 PM by Mel.)
(07-12-2021, 01:53 PM)StoneHendge Wrote: What mags are you using? I couldn't get them to feed in my Duramag's. Bottom of the hollow "point" jams into the lip.
im using asc arc and grendel 15rd mags
(07-12-2021, 09:34 AM)Dino11 Wrote: I don't think those are bad groups shooting on a windy day for that bullet at 200 yards, actually pretty good.
I want to try some of them but I am pretty flush on bullets right now and don't have enough time to test anything right now, Hell I need to get in the reloading room right now and load some. I have a new barrel I want to test out this weekend.
its not bad at all but i know i/the rifle can do better normally i wouldnt have tested on a day like yesterday but sundays are my only day off so if i can this comming weekend ill probably shoot .4-.6-.8 and add a 32g load to also test
hoping to achieve the same level of accuracy as with the sierra 75g hp;s bottom goup is a 31.4g load
![[Image: RSdHds5.jpg]](https://i.imgur.com/RSdHds5.jpg)
Posts: 23
Threads: 1
Joined: May 2021
Nice. Have you played with seating depth yet. I would shoot the 31.4 and 31.6 loads again with the depth varied. Do 5 at +.015 and 5 at -.015. You got a good load but I think there is a little more there. My experience with 2000 mr is it likes the upper end so you could find the upper node your looking for. I like your results so far. I’ve only used Lever and CFE for the ARC But 2000 gave me good results in my 2 Valkyries. Trashed the brass but makes Bug holes.
Posts: 80
Threads: 15
Joined: Mar 2021
(07-12-2021, 09:41 PM)BG Shooter Wrote: Nice. Have you played with seating depth yet. I would shoot the 31.4 and 31.6 loads again with the depth varied. Do 5 at +.015 and 5 at -.015. You got a good load but I think there is a little more there. My experience with 2000 mr is it likes the upper end so you could find the upper node your looking for. I like your results so far. I’ve only used Lever and CFE for the ARC But 2000 gave me good results in my 2 Valkyries. Trashed the brass but makes Bug holes.
not yet all 20 of those were loaded at the same oal , one thing i just relized was i accidently loaded those in freshly converted 6.5 gren brass so i suspect loading them now into fired brass will make a bit of a difference
