Starline Brass

[rocknrod]

Just received 500 rounds of starline brass. Was 6 weeks from when I started watching before I could back order. Another 5 weeks to receive it. Now have the dies and all the components. Still need a rifle, waiting on a Savage 110 switchback from Sportsmans.

[SpeyRod]

It’s worth the wait. Take the time now to measure neck tension and do any brass prep. FWIW, I bought the forester sizing die, neck iron and tension testing pin. Turns out the sizing die perfectly set the tension to my desired spec.

[Cwlongshot]

I agree and love Forster dies.

I also suggest ya take this time ta prep the brass. Most of the work is a one time thing and you have the time now.

I was able ta grab a bag of 50 @ Midway then another 100 Midsouth or Natchez couple weeks later.

I also made some from 7.62x39 brass and fire formed yesterday. They where very snug in my chamber, I made about 25/30 of three differrent head stamps. Win, PMC and Federal. I didnt shoot the Winchesters yet but all Fed and PMC formed nicely with start loads.
Last nite I deprimed all and washed then annealed and put in dryer.

Good luck!

CW

Here is two videos I posted on the forming process.

https://youtu.be/tr3oCHO2lYA?si=hvqpMljItw0JVCEk
https://youtu.be/PTeuyadYrqk?si=bTdJ0Of2SX1AFV79