Has anyone done any work with Nosler 100gr 6mm partitions bullets? I'm wondering about seating depth. The partitions are not as sleek as the 103gr ELD-X bullets I've already loaded to fit in my magazines. I did load a few of the partitions to fit my mags, but because of their blunter shape, it's looking like they might be set out too long & maybe contact the lands when chambered.
I have the Hornady 6mm ARC modified case for determining bullet seating depth but no barrel yet (maybe to arrive soon after 01/21... I hope!). I'm thinking I'll go ahead & finish my ladders with the bullets at mag depth & then re-seat them again later if I have to.
In the pic, the Nosler bullet is on the left. The bullet on the right is Hornady factory ammo 108gr ELD-M.
I have the Hornady 6mm ARC modified case for determining bullet seating depth but no barrel yet (maybe to arrive soon after 01/21... I hope!). I'm thinking I'll go ahead & finish my ladders with the bullets at mag depth & then re-seat them again later if I have to.
In the pic, the Nosler bullet is on the left. The bullet on the right is Hornady factory ammo 108gr ELD-M.
The trick is growing up without growing old. -- Casey Stengal