Ok , New glasses changed to a 2x7x33 Leupold scope . Did the Magazine thing CZ527 said to do and cleaned the throat like Pac Nor said .

She works perfect and shoots good for me. 

Going to Alabama Thursday for deer so I ran over to an indoor range and was happy with these shots , I'll try to get better after I get back

CZ527 with 24' Pac Nor Barrel Factory Hornady 103 eld-x ammo, Looking forward to my first deer with her

I put together some data for IMR 3031 to test, but my cases will not chamber after sizing. Every dimension matches but case length from an unfired piece of new hornady brass that will chamber. Could 5 thousandths case length prevent a case from chambering? They are right at 1.490 and the factory is 1.485.

Has anyone tried IMR3031 for 90+ grain pills? I've seen a lot of PDFs of Quickload recommending it but no published data or info of people trying it.

https://www.midsouthshooterssupply.com/i...nt?Tk=DFBU

To high for me

New Hodgdon data for the 6 ARC in the 2023 mag, and online.

Look forward to learning on the forum.  Hope to go test some loads in the next week.

finally got out to retest some of my load and go great results. vv n540 27.5 grains sub1/2 inch group no problem.
also h4895 25.2-25.4 gr absolutly hammered. .3 in group one ragged hole. easily covered with a dime. try other powder to get away from the temp sensitive ball stuff. chrono battery died so will have to load more to verfy. but feel like i am finally catching my breath on this one

I've got a friend who's asked me to load him up some Nosler 55gr. Ballistic Tips for coyote hunting. I'll be using Hornady once fired brass along with X-terminator powder and will be loading for an AR with an 18" barrel with 1 in 7.5" twist. Does anyone else have any experience loading these bullets and powder combo and if so, what's your favorite load?

Merry Christmas one and all!

Anyone else shoot the 6mm ARC in the TC Contender (G2}?